CRAIG'S

ROBOTICS &

ANIMATRONICS SITE

Haunting Creation, Consulting, Prop Fabrication and

Animatronics Hardware and Software

**Solutions, Consulting & Products for the Haunting Enthusiast**

Blodbar.gif (5078 bytes)

 

About Us

Contact Us

Customer Testimonials

Props For Sale

Prop-Mover Mechanisms For Sale

Pneumatic, Animatronic and other Prop Supplies

What's New?

Pneumatic Haunt Projects

Past Projects

The Fab Shop

T-Shirts

Home Page

Our Services

Feedback

Guestbook

Disney Animatronics

Plans&Designs

 

Please allow 5 to10 business days for order processing and shipping on all products below:

EVENT TRIGGERS, TIMERS, PRESSURE MATS, DIGITAL SOUND RECORDERS and SPEAKERS:

ITEM #                   

       
TRGTM01
Repeat Cycle 0.3-60 sec Timer ModuleOutput contact rating 5A at 200 VAC. Perfect for small to medium animations. Requires a 12V 50mA power supply not included.(MCM) $44.95
TRGTM02
Single Event 2 Second to 45 Minute on Timer: By closing the contact via pressure mat, switch, IR, etc, the relay will be activated during the adjusted time. Time on is adjusted by potentiometer on board. Output contact rating 5A at 200 VAC. Perfect for small to medium animations. Requires a 12V 50mA power supply not included.(MCM)
$39.95 147871.jpg (3648 bytes)
MAT01
Pressure mat - durable and moisture resistant (6"x23") $69.95 mat.JPG (14150 bytes)

 

IRM01
Infrared Module Switch: Enclosed in durable plastic and weather resistant, this IR module will sense movement up to 8 feet, and will trigger an internal relay. Works with a 9V battery eliminator, or 9V battery. Works in light or darkness!!! $59.95 IRMod.jpg (11914 bytes)
IRM02
IR Proximity  Detector / Switch:

A reflector is mounted  up to 8 feet away (not included - but you can use a bike reflector). Connect any source of DC from 10V up to 30V to 2 of the leads and a load to the output leads. Each time the invisible beam is interrupted, the load will activate or deactivate (your choice) then immediately reset when the beam is not blocked.

 

$129.00

OUT OF STOCK

New-2.BMP (17358 bytes)
 

SPKR01

This is a high quality, heavy duty horn ideal for indoor or outdoor use. It is capable of handling up to 30 watts RMS, 40 watts max.  Great for animations ! $39.95 300-060m.jpg (4221 bytes)

 

PNEUMATIC SUPPLIES (Air valves, Cylinders, Fittings):

Custom sizes and parts are available. If you need something not pictured below, e-mail engineering@craigsrobotics.com with specific needs, and we'll find it for you!

Note: Air fittings are not included with cylinders, valves or regulators... We sell air fittings below for the cylinders and valves we sell.

PNEAIR06DBL
Double-Acting Pneumatic air cylinder (100 psi max)   6" stroke, 1/8" NPT ports, 3/4" Bore.  It is sufficient for most small to medium-duty applications. Can be used as a single-acting (gravity retracted), or double-acting cylinder.  $59.95 + s/h cylinder.gif (2717 bytes)
SOLAIR12
Solenoid air-valves (100 psi max) 12 V 5A . 3-Way 2-port normally non-passing. Will operate single acting or one-way double-acting cylinder only. Exhausts to atmosphere. 1/8" NPT ports. $64.95 + s/h airvalv12.gif (1577 bytes)3w2p.gif (1849 bytes)
SOLAIR120
Solenoid air-valves (100 psi max) 120 V. 3-Way 2-port normally non-passing. Will operate single acting or one-way spring return double-acting cylinder only. Exhausts to atmosphere. $69.95 + s/h airvalv12.gif (1577 bytes)3w2p.gif (1849 bytes)
SOLAIRDB

12V

120V

4-way 1/8" NPT 12VDC or 120VAC- use for double-acting cylinders $74.95 + s/h
REG01
Pneumatic Regulator and pressure guage  (1/8" NPT 1/4" hose ready) $59.95 +s/h Reg.jpg (46198 bytes)
PIVBRAC
Pivot Braces  for above cylinder. Will allow your cylinder to pivot on its base. $9.95 per set pivot.gif (2468 bytes)
FOOTBRAC
Foot Brace for above cylinder. Will keep your cylinder horizontally or vertically stable. $8.95 footbrac.gif (2770 bytes)
14PFITBAG
1/4" Male Push-in hose fittings - fits 1/4" OD hose and 1/4" female threaded port. Use this size for SOLAIRDA. $27.99 for bag of 10 Qnty. fittings.gif (504 bytes)
18PFITBAG
1/4" Male Push-in hose fittings - fits 1/4" OD hose and 1/8" female threaded port. Use this size for Solair12, Solair 120, Reg01, and   Pneair06com. $26.99 for bag of 10 Qnty. fittings.gif (504 bytes)

 

SURPLUS and USED PNEUMATIC SUPPLIES

We now carry surplus air cylinders and valves. These items have been removed from equipment and we cannot warranty them. As far as we know , they do work, they've just been used. These items may have fittings already mounted.             

SUR14CYL034
14" stroke. Double acting. Max. air pressure 250 psi.   Actuator rod is 3/4" dia. Ports are female 1/8" NPT .(H&R) $39.95 Aircyl14.gif (823 bytes)
SUR24SOLM07
Consists of six Numatics®  valves and one  valve mounted on a common manifold. Valve coils are rated 24 VDC 6 watts. As set up on the manifold all valves have a common air supply. Six valves are set up to operate 2-way air cylinders.  The seventh valve is also set up to operate a 2-way cylinder (H&R) $149.99

 

Surmul2.jpg (2613 bytes)

 

 

 
Last  modified: September 01, 2010

All images, plans and design graphics are the sole property of Craig's Robotics & Animatronics, and are protected by copyright law. Under no circumstances should any items be reproduced or copied without written consent from Craig's Robotics & Animatronics.

Copyright 1998- 2009 Craig's Robotics & Animatronics